Zipper Scratchies!

Protect yourself from those darn 'zipper scratchies'!

Sometimes when wearing a garment with an invisible zipper, the end of it - where the zipper stops - can be rough and scratchy.  Here's a quick tip on how to cover that end before you insert the zipper.

1. Use a soft, yet dense enough strip of fabric like cotton interlock.  Cut the strip 1" (2.5 cm) by about 2 1/4" (5.8 cm) wide.

2.  Lay this strip on the right side of the zipper tape with the cut edge almost on the end of the zipper.  Stitch directly beneath the zipper stop across the width of the zipper.

 3.  Trim some of the strip to remove excess bulk.

 4.  Fold the fabric strip around to the wrong side of the zipper wrapping/enclosing the ends of the zipper tape.

5.  Then from the right side, stitch in the ditch, sewing through all layers to secure it in position.

6.  Proceed with the normal application instructions to insert an invisible zipper.

...And on the inside, it looks like this...

This soft, little piece of fabric protects you from the 'zipper scratchies'.  It's a quick little technique.  Give it a try the next time you apply an invisible zipper.

Kindly,
Glenda...the Good Stitch!